Water Electrolyser Quick Quality Water Tester - Electrolysis Iron Bars Tester 30 sec
You Save 56% ($46.00)
This Water Electrolyzer product enables cheap and easy testing of drinking water quality. This Water Electrolyzer provides a very quick & convenient alternative to conventional testing papers and liquid test kits. No more chemical testing and solutions are needed.
It has positive and negative two-electrode rods (one is an iron rod and the other is an aluminium rod) – twoelectrodesintroduced as an electric field.
Under the action of current, the positive valence Fe3+ ions are dissolved, and they will combine with the negative OH- ions in the water to form water-insoluble Fe(OH)3 particles, which are colloidal particles in the water.
Easy to operate and quick, obvious to get the result
Provides a simple way to test water quality
Get results instantly.
Provide us with a simple and cheap way to test water quality.
No chemical testing and solutions are needed.
Used to test the water purity level, the client can see the condition of drinking water.
Generally,the more contaminants there are in the water, the more conductive the water will be, and the faster the reaction will be.
The discolouration is purely from the electrode giving off rust into the water, but the rate at which it rusts depends on how conductive (contaminated) the water is.
Water Electrolyzer Usage Method :
Prepare to test the water – take two glasses with a capacity of 100-150 ml, one for tap water, the other for purified water, and put them on the table.
For the examination of water quality, you need to take two cups (100~150ml, transparent )
One cup holds well or tap water that you want to test, and the other cup holds purified distilled or filtered water.
Then put two ends of the tool into the two cups, press the button ON, the test begins.
Usually, the test time is 30 seconds, but you can continue for up to 4 minutes.
When finished, switch the power switch to OFF (off) position and finally take out the electrolyzer.
Material:ABS+ aluminium iron
Size (Approx.):body length: 10.7 x 9.7 x 6cm / 4.21 x 3.82 x 1.02in
Power cable length:80 cm / 31.50in
Iron bar length:7 cm / 2.8 cm (2.76 x 1.10in)
Measuring range:50 to 200 mg/L
Rated Voltage:110V / 60hz (USA), or 220V / 50Hz (EU)
Blue: bacteria, viruses, carcinogens, organic phosphorus (fertilizers, detergents and pesticides)
Red: iron and rust, bacteria
White: lead, zinc, mercury, inorganic dirt
Black: heavy metals (zinc, lead, copper, chromium, manganese, cadmium)
TDS Meter Accurately measures the PPM of your water. A MUST have tool to measure the quality of your water.
This Water Electrolyzer will give you preliminary results. If you need actual and accurate results you will need to send your water sample to a professional laboratory. They will do a thorough analysis of your tap water content and give you a measured results report of each substance found in the water sample.
Why perform regular water quality measurements and what Tests to use?
To make sure that water does not contain any harmful substances and odours (especially heavy metals and organic compounds).
Water Softness and hardness of water, usually between 50-200mg / L (as calcium carbonate).
PH value between weakly alkaline (7.0-8.0).
Water and trace elements, and the proportion of moderate mineral content, similar to the normal liquid;
Dissolved oxygen and carbon dioxide content of moderate (dissolved oxygen ≥6-7mg / L).